TuneBoy Ducati Marelli Flash Tuning Kit

TuneBoy

DUCATI MARELLI TUNEBOY ECU FLASH/TUNE KIT

Magneti Marelli 59M & 5AM ECU's. This includes the OBDII USB cable, diagnostic software and one TuneEdit key. This is everything you need to make custom maps and diagnose faults for your Ducati with the Magnetti Marelli 59M & 5AM ECU's.

 

ADDITIONAL TUNE KEY
Use this option if you already have the TuneBoy cable and just want to purchase a Tune/ECU key to allow custom maps to be loaded to another bike - no need to buy the complete kit.

FEATURES FOR THE MT/FZ-07

  • Data Logging

    The TuneBoy logging software for the Marelli ECU records the information needed to adjust the fuel mapping on your motorcycle. The software records the RPM, throttle position, engine temperature and up to two wide band Air Fuel ratio inputs (LC-2 wide-band O2 sensor kit is sold separately).
    The logging information is used by the map editing software.
    The following screen shot shows the logging software screen.
     

     
    The logging software will connect to the ECU using WiFi or the USB connection. When you press the Connect button you are asked for a log file name and logging will continue until you close the program.
     

    Map Editing

    The TuneEdit_Marelli program allows you to adjust fuel and ignition tables for the Marelli map files.
    You can adjust the fuel tables for front and rear cylinders and ignition tables for front and rear. You can also adjust the rev limit, speedo and can change the dash message that appears at start-up.
    On some 5AM ECU maps we have also found the thermo fan setting so you can adjust the fan turn on point.
    As new tables are identified we will add access to these in the TuneEdit program.
    The following screen shot shows the TuneEdit_Marelli program.
     

     
    The fuel and ignition maps can be viewed as text as shown in the screen shot above, or they can be viewed in a graphical view
    The screen shot below shows the fuel map in the graphical view.
     

     
    When you process the log files the TuneEdit program will build a table containing the average air fuel ratio for each of the map points you passed through during the logging session.
    The screen shot below shows the TuneEdit_Marelli screen with the data from a logging session.

    The values in the A/F tables are used to correct the fuel tables. These corrections are done by the TuneEdit_Marelli program when you select the Correct fuel map option.
     

    ECU Reflash

    The Flash_Marelli program handles the task of reprogramming the ECU.
    Re-flashing the ECU is as simple as starting the program, selecting the map file you want to load and clicking the Flash map into ECU button.
    The reflash of the Marelli ECU takes around four minutes.
     
     

    Supported models

    Hypermotard

    1100 (2008,2009)

    Monster

    400 (2005)    620 (2005,2006)    695 (2006,2007,2008)    1000/1000s (2005)
    S2R 800 (2005,2006,2007)    S2R 1000 (2006,2007,2008)    S4R (2005,2006,2007,2008)
    S4Rs (2006,2007,2008)

    MULTISTRADA

    620 (2005,2006)    1000 (2005,2006)    1100 (2006,2007,2008,2009)

    SportClassic

    GT 1000 (2006,2007,2008,2009,2010)    Paul Smart 1000 (2006)
    Sport 1000 (2006,2007,2008,2009)

    SportTouring

    ST3,ST4s (2005,2006,2007)

    StreetFighter

    848 and 1098 (All years)

    Superbike

    749    749s    749R    848   848 EVO

    996    998,    998S    998R    999    999S    999R
    1098    1098s    1098R    1198    1198s

    SuperSport

    1000 (2005,2006)

Full Dyno tuning services also available in 2 locations - contact us for details


End User Product

For use by yourself and/or your capable technician. Support options available HERE for purchase and recommended unless prior experience editing & flashing ECU's

Customer Reviews

Based on 1 review Write a review